Primary & Secondary · SOBM
Primary & Secondary · SOBM
SOBM Emulsifiers
PZT-EMU-P (Primary) and PZT-EMU-S (Secondary) emulsifiers are engineered for synthetic oil-based and oil-based drilling fluid systems. Together they deliver stable water-in-oil emulsions with Electrical Stability (ES) exceeding 800V at HPHT conditions above 300°F (149°C). Polyamide-based surfactant chemistry ensures drill solids remain completely oil-wet. Flash point >93°C (>200°F). Specific gravity 0.90–0.95 g/mL. Compatible with linear paraffins, internal olefins, and esters.
Available grades:Primary Emulsifier PZT-EMU-PSecondary Emulsifier PZT-EMU-S
ES Target (HPHT)
>800V at >300°F (149°C)
Flash Point
>93°C (>200°F)
Specific Gravity
0.90–0.95 g/mL
Full TDS available on request, contact sales@petriz.co
form
Liquid Concentrate
application
Primary & Secondary Emulsification · SOBM / OBM Systems
compatibility
Linear Paraffins · Internal Olefins · Esters
packaging
200L HDPE Drums · 1000L IBC Totes
Rates shown are indicative; actual dosage depends on temperature, mud weight, and application conditions.
Available Documentation
TDS - Technical Data SheetSDS - EN · ES · PTCOA - Certificate of Analysis
Request Full Documentation PackResponse within 24 hours · sales@petriz.co
Use Cases & Applications
- Primary and secondary emulsifier packages in SBM/OBM drilling fluid systems
- HPHT and deepwater wells where WBM shale inhibition alone is insufficient
- Maintaining stable water-in-oil emulsions through drilled-solids or formation-water contamination
Pros
- Excellent emulsion stability even at high temperature and under solids or water-influx contamination
- Enables very low water-phase permeability, minimizing filtrate-driven formation damage
- Delivers the shale inhibition, lubricity, and thermal stability that make OBM/SBM the preferred choice in extreme HTHP wells
Cons & Limitations
- Significantly higher cost than WBM chemistry
- Heavier environmental and regulatory scrutiny on OBM systems (cuttings disposal, offshore discharge restrictions)
- Emulsion can still break under severe contamination - major water influx or high-salinity kicks require careful ongoing monitoring
Primary EmulsifierPZT-EMU-P
Primary non-ionic/amine-based surfactant that forms and stabilizes the water-in-oil emulsion: the core chemistry that makes an invert-emulsion system viable at all.
Secondary EmulsifierPZT-EMU-S
Co-emulsifier used alongside the primary emulsifier to reinforce emulsion stability under contamination stress: water influx, drilled solids, or high-temperature conditions.
All grades ship under the same product family, contact sales@petriz.co for grade-specific TDS/SDS.
Response within 24 hours
Product Tags
SOBMEmulsifierHPHTOBMSDS: EN · ES · PT